Goto Chapter: Top 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 Bib Ind

5 Functions

The section 4.11 describes how to define a function. In this chapter we describe functions that give information about functions, and various utility functions used either when defining functions or calling functions.

`‣ NameFunction` ( func ) | ( attribute ) |

returns the name of a function. For operations, this is the name used in their declaration. For functions, this is the variable name they were first assigned to. (For some internal functions, this might be a name *different* from the name that is documented.) If no such name exists, the string `"unknown"`

is returned.

gap> NameFunction(SylowSubgroup); "SylowSubgroup" gap> Blubberflutsch:=x->x;; gap> HasNameFunction(Blubberflutsch); true gap> NameFunction(Blubberflutsch); "Blubberflutsch" gap> a:=Blubberflutsch;; gap> NameFunction(a); "Blubberflutsch" gap> SetNameFunction(a, "f"); gap> NameFunction(a); "f" gap> HasNameFunction(x->x); false gap> NameFunction(x->x); "unknown"

`‣ NumberArgumentsFunction` ( func ) | ( operation ) |

returns the number of arguments the function `func` accepts. -1 is returned for all operations. For functions that use `...`

or `arg`

to take a variable number of arguments, the number returned is -1 times the total number of parameters. For attributes, 1 is returned.

gap> NumberArgumentsFunction(function(a,b,c,d,e,f,g,h,i,j,k)return 1;end); 11 gap> NumberArgumentsFunction(Size); 1 gap> NumberArgumentsFunction(IsCollsCollsElms); 3 gap> NumberArgumentsFunction(Sum); -1 gap> NumberArgumentsFunction(function(a, x...) return 1; end); -2

`‣ NamesLocalVariablesFunction` ( func ) | ( operation ) |

returns a mutable list of strings; the first entries are the names of the arguments of the function `func`, in the same order as they were entered in the definition of `func`, and the remaining ones are the local variables as given in the `local`

statement in `func`. (The number of arguments can be computed with `NumberArgumentsFunction`

(5.1-2).)

gap> NamesLocalVariablesFunction(function( a, b ) local c; return 1; end); [ "a", "b", "c" ] gap> NamesLocalVariablesFunction(function( arg ) local a; return 1; end); [ "arg", "a" ] gap> NamesLocalVariablesFunction( Size ); fail

`‣ FilenameFunc` ( func ) | ( function ) |

For a function `func`, `FilenameFunc`

returns either `fail`

or the absolute path of the file from which `func` has been read. The return value `fail`

occurs if `func` is a compiled function or an operation. For functions that have been entered interactively, the string `"*stdin*"`

is returned, see Section 9.5.

gap> FilenameFunc( LEN_LIST ); # a kernel function fail gap> FilenameFunc( Size ); # an operation fail gap> FilenameFunc( x -> x^2 ); # an interactively entered function "*stdin*" gap> meth:= ApplicableMethod( Size, [ Group( () ) ] );; gap> FilenameFunc( meth ); "... some path .../grpperm.gi"

`‣ StartlineFunc` ( func ) | ( function ) |

`‣ EndlineFunc` ( func ) | ( function ) |

Let `func` be a function. If `FilenameFunc`

(5.1-4) returns `fail`

for `func` then also `StartlineFunc`

returns `fail`

. If `FilenameFunc`

(5.1-4) returns a filename for `func` then `StartlineFunc`

returns the line number in this file where the definition of `func` starts.

`EndlineFunc`

behaves similarly and returns the line number in this file where the definition of `func` ends.

gap> meth:= ApplicableMethod( Size, [ Group( () ) ] );; gap> FilenameFunc( meth ); "... some path ... /lib/grpperm.gi" gap> StartlineFunc( meth ); 487 gap> EndlineFunc( meth ); 487

`‣ LocationFunc` ( func ) | ( function ) |

Let `func` be a function. Returns a string describing the location of `func`, or `fail`

if the information cannot be found. This uses the information provided by `FilenameFunc`

(5.1-4) and `StartlineFunc`

(5.1-5)

gap> LocationFunc( Intersection ); "... some path ... gap/lib/coll.gi:2467" # String is an attribute, so no information is stored gap> LocationFunc( String ); fail

`‣ PageSource` ( func[, nr] ) | ( function ) |

This shows the file containing the source code of the function or method `func` in a pager (see `Pager`

(2.4-1)). The display starts at a line shortly before the code of `func`.

For operations `func` the function shows the source code of the declaration of `func`. Operations can have several declarations, use the optional second argument to specify which one should be shown (in the order the declarations were read); the default is to show the first.

For kernel functions the function tries to show the C source code.

If GAP cannot find a file containing the source code this will be indicated.

Usage examples:

`met := ApplicableMethod(\^, [(1,2),2743527]); PageSource(met);`

`PageSource(Combinations);`

`PageSource(SORT_LIST); `

`PageSource(Size, 2);`

`ct := CharacterTable(Group((1,2,3))); `

`met := ApplicableMethod(Size,[ct]); PageSource(met); `

`‣ CallFuncList` ( func, args ) | ( operation ) |

`‣ CallFuncListWrap` ( func, args ) | ( operation ) |

returns the result, when calling function `func` with the arguments given in the list `args`, i.e. `args` is "unwrapped" so that `args` appears as several arguments to `func`.

gap> CallFuncList(\+, [6, 7]); 13 gap> #is equivalent to: gap> \+(6, 7); 13

A more useful application of `CallFuncList`

is for a function `g`

that is called in the body of a function `f`

with (a sublist of) the arguments of `f`

, where `f`

has been defined with a single formal argument `arg`

(see 4.11), as in the following code fragment.

f := function ( arg ) CallFuncList(g, arg); ... end;

In the body of `f`

the several arguments passed to `f`

become a list `arg`

. If `g`

were called instead via `g( arg )`

then `g`

would see a single list argument, so that `g`

would, in general, have to "unwrap" the passed list. The following (not particularly useful) example demonstrates both described possibilities for the call to `g`

.

gap> PrintNumberFromDigits := function ( arg ) > CallFuncList( Print, arg ); > Print( "\n" ); > end; function( arg... ) ... end gap> PrintNumberFromDigits( 1, 9, 7, 3, 2 ); 19732 gap> PrintDigits := function ( arg ) > Print( arg ); > Print( "\n" ); > end; function( arg... ) ... end gap> PrintDigits( 1, 9, 7, 3, 2 ); [ 1, 9, 7, 3, 2 ]

`CallFuncListWrap`

differs only in that the result is a list. This returned list is empty if the called function returned no value, else it contains the returned value as its single member. This allows wrapping functions which may, or may not return a value.

gap> CallFuncListWrap( x -> x, [1] ); [ 1 ] gap> CallFuncListWrap( function(x) end, [1] ); [ ]

`‣ MemoizePosIntFunction` ( function[, options] ) | ( function ) |

`MemoizePosIntFunction`

returns a function which behaves the same as `function`, except it caches the results for any inputs that are positive integers. Thus if the new function is called multiple times with the same input, then any call after the first will return the cached value, instead of recomputing it. By default, the cache can be flushed by calling `FlushCaches`

(79.10-4).

The returned function will by default only accept positive integers.

This function does not promise to never call `function` more than once for any input -- values may be removed if the cache gets too large, or if `FlushCaches`

(79.10-4) is called, or if multiple threads try to calculate the same value simultaneously.

The optional second argument is a record which provides a number of configuration options. The following options are supported.

`defaults`

(default an empty list)Used to initialise the cache, both initially and after each flush. If

`defaults[i]`

is bound, then this is used as default vale for the input`i`

.`flush`

(default`true`

)If this is

`true`

, the cache is emptied whenever`FlushCaches`

(79.10-4) is called; if false, then the cache cannot be flushed.`errorHandler`

(defaults to`Error`

(6.6-1))A function to be called when an input which is not a positive integer is passed to the cache. The function can either raise an error, or else return a value which is then returned by the cache. Note that such a value does not get cached itself.

gap> f := MemoizePosIntFunction( > function(i) Print("Check: ",i,"\n"); return i*i; end, > rec(defaults := [,,50], errorHandler := x -> "Bad") );; gap> f(2); Check: 2 4 gap> f(2); 4 gap> f(3); 50 gap> f(-3); "Bad" gap> FlushCaches(); gap> f(2); Check: 2 4 gap> f(3); 50

The following functions return fixed results (or just their own argument). They can be useful in places when the syntax requires a function, but actually no functionality is required. So `ReturnTrue`

(5.4-1) is often used as family predicate in `InstallMethod`

(78.3-1).

`‣ ReturnTrue` ( ... ) | ( function ) |

This function takes any number of arguments, and always returns `true`

.

gap> f:=ReturnTrue; function( arg... ) ... end gap> f(); true gap> f(42); true

`‣ ReturnFalse` ( ... ) | ( function ) |

This function takes any number of arguments, and always returns `false`

.

gap> f:=ReturnFalse; function( arg... ) ... end gap> f(); false gap> f("any_string"); false

`‣ ReturnFail` ( ... ) | ( function ) |

This function takes any number of arguments, and always returns `fail`

.

gap> oops:=ReturnFail; function( arg... ) ... end gap> oops(); fail gap> oops(-42); fail

`‣ ReturnNothing` ( ... ) | ( function ) |

This function takes any number of arguments, and always returns nothing.

gap> n:=ReturnNothing; function( object... ) ... end gap> n(); gap> n(-42);

`‣ ReturnFirst` ( ... ) | ( function ) |

This function takes one or more arguments, and always returns the first argument. `IdFunc`

(5.4-6) behaves similarly, but only accepts a single argument.

gap> f:=ReturnFirst; function( first, rest... ) ... end gap> f(1); 1 gap> f(2,3,4); 2 gap> f(); Error, Function: number of arguments must be at least 1 (not 0)

`‣ IdFunc` ( obj ) | ( function ) |

returns `obj`. `ReturnFirst`

(5.4-5) is similar, but accepts one or more arguments, returning only the first.

gap> id:=IdFunc; function( object ) ... end gap> id(42); 42 gap> f:=id(SymmetricGroup(3)); Sym( [ 1 .. 3 ] ) gap> s:=One(AutomorphismGroup(SymmetricGroup(3))); IdentityMapping( Sym( [ 1 .. 3 ] ) ) gap> f=s; false

Functions are **GAP** objects and thus have categories and a family.

`‣ IsFunction` ( obj ) | ( category ) |

is the category of functions.

gap> IsFunction(x->x^2); true gap> IsFunction(Factorial); true gap> f:=One(AutomorphismGroup(SymmetricGroup(3))); IdentityMapping( Sym( [ 1 .. 3 ] ) ) gap> IsFunction(f); false

`‣ FunctionsFamily` | ( family ) |

is the family of all functions.

The way functions are named in **GAP** might help to memorize or even guess names of library functions.

If a variable name consists of several words then the first letter of each word is capitalized.

If the first part of the name of a function is a verb then the function may modify its argument(s) but does not return anything, for example `Append`

(21.4-5) appends the list given as second argument to the list given as first argument. Otherwise the function returns an object without changing the arguments, for example `Concatenation`

(21.20-1) returns the concatenation of the lists given as arguments.

If the name of a function contains the word "`Of`

" then the return value is thought of as information deduced from the arguments. Usually such functions are attributes (see 13.5). Examples are `GeneratorsOfGroup`

(39.2-4), which returns a list of generators for the group entered as argument, or `DiagonalOfMat`

(24.12-1).

For the setter and tester functions of an attribute `Attr`

the names `SetAttr`

resp. `HasAttr`

are available (see 13.5).

If the name of a function contains the word "`By`

" then the return value is thought of as built in a certain way from the parts given as arguments. For example, creating a group as a factor group of a given group by a normal subgroup can be done by taking the image of `NaturalHomomorphismByNormalSubgroup`

(39.18-1). Other examples of "`By`

" functions are `GroupHomomorphismByImages`

(40.1-1) and `LaurentPolynomialByCoefficients`

(66.13-1).

Often such functions construct an algebraic structure given by its generators (for example, `RingByGenerators`

(56.1-4)). In some cases, "`By`

" may be replaced by "`With`

" (like e.g. `GroupWithGenerators`

(39.2-3)) or even both versions of the name may be used. The difference between `StructByGenerators`

and `StructWithGenerators`

is that the latter guarantees that the `GeneratorsOfStruct`

value of the result is equal to the given set of generators (see 31.3).

If the name of a function has the form "`AsSomething`

" then the return value is an object (usually a collection which has the same family of elements), which may, for example:

know more about its own structure (and so support more operations) than its input (e.g. if the elements of the collection form a group, then this group can be constructed using

`AsGroup`

(39.2-5));discard its additional structure (e.g.

`AsList`

(30.3-8) applied to a group will return a list of its elements);contain all elements of the original object without duplicates (like e.g.

`AsSet`

(30.3-10) does if its argument is a list of elements from the same family);remain unchanged (like e.g.

`AsSemigroup`

(51.1-6) does if its argument is a group).

If `Something`

and the argument of `AsSomething`

are domains, some further rules apply as explained in Tutorial: Changing the Structure.

If the name of a function `fun1`

ends with "`NC`

" then there is another function `fun2`

with the same name except that the `NC`

is missing. `NC`

stands for "no check". When `fun2`

is called then it checks whether its arguments are valid, and if so then it calls `fun1`

. The functions `SubgroupNC`

(39.3-1) and `Subgroup`

(39.3-1) are a typical example.

The idea is that the possibly time consuming check of the arguments can be omitted if one is sure that they are unnecessary. For example, if an algorithm produces generators of the derived subgroup of a group then it is guaranteed that they lie in the original group; `Subgroup`

(39.3-1) would check this, and `SubgroupNC`

(39.3-1) omits the check.

Needless to say, all these rules are not followed slavishly, for example there is one operation `Zero`

(31.10-3) instead of two operations `ZeroOfElement`

and `ZeroOfAdditiveGroup`

.

GAP supports the use of code annotations (pragmas) in functions, i.e., adding comments to functions that are stored in the function object itself, unlike regular comments. Pragmas are single-line comments, starting with `#%`

:

gap> function() > #% This is a pragma > # This is not a pragma > return; > end;; gap> Display( last ); function ( ) #% This is a pragma return; end

Pragmas can be used to mark parts of functions that should later be manipulated using 4.16.

Please note that heavy use of pragmas in functions slows down the execution of your function in the same way as adding empty `;`

statements to your code.

gap> a := function( ) > local i; > for i in [ 1 .. 1000000 ] do > i := i + 1; > od; > end; function( ) ... end gap> a(); gap> time; 14 gap> b := function( ) > local i; > for i in [ 1 .. 1000000 ] do > i := i + 1; > #% pragma > #% pragma > #% pragma > #% pragma > #% pragma > od; > end; function( ) ... end gap> b(); gap> time; 25

Goto Chapter: Top 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 Bib Ind

generated by GAPDoc2HTML